How to program the Legacy TV remote to the TV set

How to program the remote to the TV set.

To program the Tbaytel Legacy remote to the TV, it is best to start with the TV Set turned on and viewing any channel. This will make it easier to know that the power button programming is correct as the tv will turn off. This process can be done two ways.

 

The Generic Method

  1. Press and hold the Setup button near the top of the remote until a Mode light flashes twice.
  2. Press and let go of the TV button, it should stay lit
  3. Press and hold the OK button until the TV set powers off
  4. This may take a bit of time as it has to go through every code from 0000 to 9999
  5. To confirm - Press the Power button and the TV should turn on
  6. Press the STB mode button to switch the remote back to Set Top Box mode.

 

By TV Manufacturer

  1. Press and hold the Setup button on the remote until a Mode light flashes twice.
  2. Press and let go of the TV button, it should stay lit
  3. Press and hold the following number until the TV set powers off
    • (1) Insignia/Dynex
    • (2) LG
    • (3) Mitsubishi
    • (4) Panasonic
    • (5) Philips/Magnavox
    • (6) Samsung
    • (7) Sharp
    • (8) Sony
    • (9) Toshiba
    • (0) Visio
  4. To confirm - Press the Power button and the TV should turn on
  5. Press the STB mode button to switch the remote back to Set Top Box mode.
Tbaytel Legacy Remote
Tbaytel Legacy Remote

Glad we could be helpful. Thanks for the feedback.

Sorry we couldn't be helpful. Your feedback will help us improve this article.

How helpful was this page?

  
Updated on Tue, 27 Feb 2024 by Sean Otway

Rendered by:WWW-C01-PRD-01.